Step-by-step guide to deactivate the rain sensor - for cleaning and maintenance

Step-by-step guide to deactivate the rain sensor in order to make cleaning and maintenance easier:

1. Ensure you have your remote controller

2. Stand near the roof control unit:

Being within range of the system is necessary for the remote to communicate with the control box. 

3. Press and hold the "STOP" button:

On your remote, locate the "STOP" button and press and hold it down for approximately 10 to 12 seconds. 

4. Listen for confirmation:

The control unit will emit beeps to confirm that the rain sensor has been deactivated. 

5. Proceed with cleaning:

With the sensor deactivated, you can now operate the louvres and clean the sensor face. 

Important considerations:

• Temporary deactivation:

  This process deactivates the sensor only for a limited time, typically 60 minutes. 

• Automatic reactivation:

  After the deactivation period, the sensor will automatically reactivate. If the sensor is still wet after this time, the roof will likely close automatically.